420*1700mm Roll To Roll Sublimation Heat Transfer Machine

420*1700mm Roller Sublimation Heat Transfer Machine is a roll to roll heat press machine to print on roll to roll fabrics and cut pieces

 



INQRUIRY

Electric Requirements:

50HZ380V or Customized

Power:

46kw

Heated Model:

Oil Heating System

Adjustable Temper Ranges:

0-399°

Working Temper:

220°-230°

Heating System:

Digital Adjustable Temper Control

Automatic System:

Frequency Motor to Control the Speed

Production:

3-8m/min

Diameter of Heating Drum:

600MM

Length of Heating Drum:

1850MM

Width of Blanket:

1780MM

Dimension:

2500mm*800mm*1300mm

Working Platen:

1800mm*2500mm

Matched Configuration:

Rewind paper/Rewind cloth/Unwind paper/Unwind cloth system

Warranty:

1 Year

Packing Size:

2600mm*1700mm*1200mm

Net Weight:

1500KG

Gross Weight:

1600KG



heat press machine

 

Rotary heat press machine is special design for those large but roll products, such as fabric, textile, curtain, mouse

pad, etc sublimation by oil roller drum heating, roller drum and fabrics should be same speed. our this size 420x1700mm printing

speed can reach 4-5 meter per minute.

 

heat press machine

 

1) The electric control adopts latest technology that allows separation of the machine body and the blanket automatic,

with a power failure protection functions. 

 2)  It is applicable to all over or piece hot press, with a 2-3 times higher work efficiency.

 3)  Electronic digital terminal temperature control and motor frequency conversion digital speed regulation, with high

accuracy (±1-2°C).

 4)  Drum surface with chrome plating, high hardness and good printing performance, wearable and stickiness-proof.

 5)  It adopts advanced oil-warming technology and liquid circular heat conduction, with even heating and high thermal

conductivity.

 6)  External oil-filling tank and auto-close valve make it convenient to change heat transfer.

 7)  A design of pneumatic pressure system make rotary  printing machine do perfect transfer.

 8) Can let the blanket to be automatic correction, ensure the normal orbit, make the efficiency of heat transfer enhancement

and the transfer quality guaranteed.



 

heat press machine
 

Machine breakdown handing :


The machine could occur breakdown during it's working, breakdown handing can be divided into two types: 

un-stop working and stop working
Un-stop working breakdown handing:

A. Found that the roller engraving embedded in a small amount of paste piece of grain or fluffy stuff, etc, 

could use small copper wire brushes brush away at the roller point. If it doesn't brush away, stop the machine

 working and then removed it.
B. Found very fine stripes on the roller surface. Could use small fine stone roughing it at the roller point, if it 

doesn't roughing, stop the machine working and send it to the carving workshop repair.

 It's rarely found this breakdown in chrome plated roller.
C. If you found the depth color is different between both sides and middle place, could adjust the pressure on 

both sides, or adjust the spacing between axis and roller, don't to make it too much tight.
D. If you found the axis, roller or other parts are loosing by strenuous vibration, you should fasten the screw 

and nut in time.
E. If you found mis-pattern, could adjust it by machine working slowly .
F. When the blanket is shifting, could adjust it by pull the chain wheel to assigned position. 
G. When found the cloth has staining situation, should turn big the drying steam valve, to increase the steam 

temperature and the cloth dryness. 
H. When found the cloth or blanket tension is too big or too small, should adjust the speed between units or 

tension device in time, make sure supply proper tension.
I. When the moisture of Water scrubbing cloth sides is unevenness , could adjust the axis sides pressure.
 

Stop working breakdown handing:


1.There is nick on the doctor blade or doctor blade became blunt, it will cause barriness or roller dirty and rough, 

you should stop the machine working to rasp it.
2.If there are too much fiber nap between doctor blade and roller, stop the machine working, use a welt cloth 

and knot in a head on one side, loosen the heavy hummer which hung on the doctor blade, hold on the another 

side of welt cloth, swept from the knife edge, it is much easy clean the knife edge.
3.If the roller has defect, stop the machine working, tear down the roller, send it to the carving workshop to repair.
4.The inner hole will enlarge after the roller working for a long time, cause roller axis and roller loosen and can not 

straight the pattern, at this time, you should stop the machine working, tear down the roller, pad the knife paper, 

re-install & tight it.
5.When the fabric is printing, because of the steam is not good or tension is too big, cause to decollation, and even 

the fabric twine to other parts, it will cause big accident, you should stop the machine working and breakdown handing
6.The roller bearing is damaged and emit heat, make the motor load increases, do not use the cold water to watering 

the bearing, you should stop the machine working, change another axis and add lubrication grease
7.If it's long time breakdown handing you should connect the leaer fabric or conductive line, close the steam valve 

 in time, and release all pressure of roller
8.After breakdown handing all, should start it machine in accor

 




factory

Suzhou Full Color Paper Industrial Co.,LTD is professional sublimation paper manufacturer in China.We are mainly dealing with 70/80g,100/120g Fast Dry Sublimation Paper,100g /120g Medium/High Sticky Sublimation Paper, Light/Dark T-shirt Transfer Paper, Dye Sublimation Ink,Heat Press Machine,Photo Paper.

sublimation transfer factory

About Our Company

We have complete confidence to offer you high quality, to satisfy well with your requirements

1.10 years experience of printer consumables production in China. 
2. Top quality material we import from Germany
3. Strict quality controlling and professional QC inspecting before shipping
4. Factory directly supply, all made by ourselves, save much cost for you. 
5. High quality and best services

6. OEM/ODM orders are acceptable

faq

1,What is your time of making samples?
Usually we will take around 3-7 days to make the samples.
 
2,What is your MOQ?
Our MOQ is 1 set

3,What is your delivery time?
The time of delivery is about 10-30 days.
 
4,What is the loading port?
Ningbo, Shenzhen, Guangzhou and Shanghai are available.
 
5,What is your payment terms?
We accept T/T, Paypal, Western Union, Moneygram, etc. 
 
6,What is your main products?
Our main products are Sublimation Transfer Paper, T Shirts Transfer Paper, Sublimation Inks and other sublimation Blanks and Equipments.
 
7, what's the shipping way? 
Via DHL, FedEx, EMS, UPS, by air, by sea...etc. As you required. 
 
8,Do you have after-sales service? 
Yes. If you have any problems, you can chat online or send email to us. 
 
our strength
 
1. Strict Quality Control:  We have over 10 workers cooperating on Quality control both for the original Material and finished Goods. QC before delivery is also what we need for each order.
 
2. One stop Solution:  We offer a wide range of sublimation paper, dye sublimation ink and Blanks. Making you able to source all the items you need.
 
3. Reasonable Pricing:  We run our own coating factory and Heat Press Machine assembling Workshop, thus to offer the most reasonable pricing and give the most profit to our clients.
 
4. Fast Delivery:   We offer one week delivery for most paper orders. And 2-3 weeks production lead time for other sublimation inks.

Other products in the same category: