Mimaki UJV100-160 Roll to Roll UV-Curable Inkjet Printer for Sign Graphics

The UJV100-160 combines technologies of Mimaki for higher image quality, more stable operation, higher productivity, and a higher degree of usability, as a competitive entry-model UV-curable inkjet printer.



  1. Latest features that achieve Mimaki quality
    - Dot position / Feeding amount auto correcting function
    - Mimaki technology that enables stable and high-quality print
  2. High productivity at a competitive price
    - High-speed printing at a maximum of 23m²/h 
    - Because no drying time is required, it is possible to perform installation or lamination immediately after printing.
  3. Capability of supporting various media types and value-added prints, achieved by using UV-curable ink
    - Use of UV-curable ink enables printing on a wide variety of media.

Mimaki printer



Print head On-demand piezo head (2 staggered layout)
Print resolution 360 dpi, 720 dpi, 900 dpi, 1200 dpi
InkType/ Color UV-curable ink LUS-210 (C, M, Y, K, W, Cl)
Ink set CMYK / CMYK+W / CMYK+WCl
Capacity 1L bottle
Maximum print width 1,610 mm (63.4 in)
MediaMaximum width 1,620 mm (63.8 in)
Thickness 1 mm or lower
Roll diameter φ250 mm or less
Roll weight 45 kg or less
Roll inside diameter 2/3 in
Certifications VCCI class A, FCC class A, ETL IEC 62368-1, 
CE Marking (EMC, Low voltage, Machinery directive, and RoHS), 
Interface USB2.0 / Ethernet 1000BASE-T
Power supply Single-phase AC100-120 / 200-240V±10%, 50/60Hz±1Hz
Power consumption AC100V:1.44kW / AC200V:1.92kW
Operational environment Temperature: 20–30 °C (68–86 °F)
Humidity: 35–65% Rh (Non condensing)
Dimensions (W×D×H) 2,775 x 700 x 1,475 mm (109.3 x 27.6 x 58.1 in)
Weight 167 kg (368.2 lb)

Ink Set:

C M Y K W Cl

Mimaki printer


  • Some of the screens and printing samples in this website are artificial renderings.
  • Specifications are subject to change without notice.
  • All trademarks or registered trademarks are the property of their respective owners.
  • Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

Precautions for UV printing:

 Inks and substrates:

  • Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
  • Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

 Mimaki printer

Safety notice:

You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

  • Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
  • Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
  • In addition, please read the instructions and guidelines of the manual carefully and follow those.

Other products in the same category: