Japan Mimaki Jv33-160 Wide Format Eco Solvent Inkjet Printer

Mimaki JV33 series bring out a high quality print of 1,440 dpi, the new JV33 series has increased print speed. With it's compact design and affordable price, the JV33 series is an attractive option for any shop. 



Overcoming the previously held misconceptions about solvent inkjet printers, the JV3 series has achieved enormous popularity ever since its release. Following in the footsteps of this revolutionary machine, the JV33 series was created. In addition to various enhancements which bring out a high quality print of 1,440 dpi, the new JV33 series has increased print speed. With it's compact design and affordable price, the JV33 series is an attractive option for any shop. Mimaki's flagship product has established high standards which set it apart from the competition.

Mimaki Printer



  JV33-130 JV33-160 JV33-260
Head On-demand Piezo head (180nozzles x 8 lines) x1 head
Maximum print width







Printing resolution 540,720,1,440dpi
Printing mode 540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
(scan x feed) 720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 
  720 x 1,440dpi
  1,440 x 1,440dpi
Ink Ink Exclusive Solvent ink: ES3 ink, SS21 ink
Exclusive aqueous pigment ink
Exclusive Sublimation ink
Capacity 4-color mode:440cc cartridge x 2/color, 880cc/color
6-color mode:440cc cartridge x 1/color, 440cc/color
Media Size







Roll weight

Less than 25kg


Less than 

100kg (220lbs.)

Print surface Roll inside diameter
Roll inside diameter 2 inch or 3 inch
Media cutting Cutting on Y direction by cutter at the head
Media heater Triple stage intelligent heater (Pre/Print/Post)
Media Take-up device Roll take-up device (standard), inside/outside selectable
Interface USB2.0
Applicable standards VCCI Kelas A , FCC Kelas A, UL 60950-1
CE Marking (EMC directive, Low voltage directive),
CB report
Power AC100~120V±10%, AC220~240V±10%,
Power consumption Less than 1,440 VA

Less than 

1,440 VA x 2


Operation environments Usable temperature:20°C~35°C (64~95°F),
Humidity:35~65%RH (No condensation)
Dimensions (W x D x H)

2,289 x 739

 x 1,424mm 

2,538 x 739 

x 1,424mm 

3,650 x 1,302

 x 1,424mm 

90.1" x 29.1"x 56.1"

99.9" x 29.1" x 56.1"

143.7" x 51.3" x 56.1"
Weight 145kg (320lbs.) 160kg (353lbs.) 450kg (992lbs.)

Mimaki Printer


Printing up to 17.5 sqm/h (quality print mode: 11.9 sqm/h)

Exclusive mild solvent and eco solvent inks available, including white ink (SS21 ink)

Print and cut combo with the CG-FXII series cutting plotters

Unattended continuous printing with UISS

Also available as water based model for dye sublimation transfer printing and aqueous pigment inks for indoor applications


Better and faster - JV33 series
The new JV33 is an updated version of Mimaki's top selling JV33 roll-to-roll series of solvent inkjet products.
A key enhancement is the addition of Mimaki Advanced Pass System (MAPS) technology, which is an innovative approach to discharging ink droplets to minimize, or even eliminate, banding in high production mode. MAPS is highly configurable to adjust the jetting process to meet specific production needs including adjustments to print speeds. The MAPS system will allow at least a 10% speed increase to the already fast printing solution and will function with all ink sets.

High resolution and high speed printing
With its increased print head accuracy, the JV33 Series delivers truly high quality print of 1440 dpi. In addition, the improved ink firing frequency has increased the print speed by 30% over the JV3 Series.

Unattended continuous printing
Uninterrupted Ink Supply System (UISS)
Standard on JV33 is the Uninterrupted Ink Supply System. This system allows for continuous printing in 4-colour mode. A maximum of 880 cc ink per colour can be loaded at one time. When one ink cartridge runs out, another cartridge of the same colour begins supplying ink. Ink cartridges can be changed during printing. With 880 cc of ink, a 50 m roll of media can be printed without interruption.

Other Useful Functions
Triple Stage Intelligent Heater
The triple stage intelligent heater automatically heats up the media to the appropriate temperature. Thereby improving the performance of the ink. The mounted post-heater quickens the drying time and thus enables a fast take-up of the media.

Stable media feeding
The multi point grid roller system ensures stable feeding of the media, which is especially important for long unattended print runs.

Standard included RIP software
The high performance RasterLink RIP software helps you to utilise the various functions of the JV33 series.


Mimaki printer


Banners, backlit signs, pop displays, floor graphics, labels, posters, high quality stickers, vehicle wrap, window signage and more.

Other products in the same category: