Home> News> How to Use a Heat Transfer Press Machine

How to Use a Heat Transfer Press Machine

Sublimation heat transfer press machine is used to put designs on clothing including shirts, jeans, handbags, hats and belts. Some presses can even apply decals to ceramic items including plates, wooden plaques, certain types of paper and many other items. The higher temperatures of these machines, along with the amount of pressure they apply, ensure that embedded designs are properly melded into the transfer object.Determine the temperature at which the decal should be applied and make certain the heat press used can accommodate it. Also make certain the temperature and pressure provided by the machine are sufficient to adhere the decal to the transfer item.

roller heat press machine
The condition of making sure the power cord is to prepare the press for operation,which connected properly and that all necessary switches are turned on and set as outlined in equipment instructions.Set the press thermostat to the proper temperature for the decal and the item onto which it's being transferred. In most instances, there will be a light that will remain on until the machine is heated to the set temperature. When the light goes off, the machine is ready.Open the press to move the top heating element pad away from the bottom transfer pad. Follow the instructions given for the specific heat press being used.Lay the transfer item onto the press within the guidelines provided on the press transfer pad. If necessary, refer to the machine's instructions to ensure proper item placement.
sublimation  printing
Then,in the following procedure,how can we do?Make sure the decal remains inside the press guidelines so that it will heat evenly and adhere properly to the transfer item.Close the heat press, clamping down the heating element pad over the top of the transfer item on the transfer pad. Lock the press into place in the closed position.Adjust heat press pressure for the type of item on which the decal is being placed. Thin clothing items may require less pressure than thicker items such as computer mouse pads.Set the heat press timer for the amount of time needed to complete the transfer successfully. If uncertain about the amount of time required, refer to the instructions provided with the decal as well as the temperature recommendations for the transfer item itself.Let the press remain closed until the timer goes off. Immediately open the press slowly, being careful to keep the decal and transfer item from sticking to the heat element pad. It should remain in place on the transfer rubber pad.Remove the decal paper according to the instructions provided. Some decals are to be removed while still hot; others must cool before they're removed.