Home> News> Large format inkjet photo machine-what accessories does it need to clean?

Large format inkjet photo machine-what accessories does it need to clean?

The large format inkjet photo machine also needs to regularly clean up the internal dirt and keep the accessories clean and tidy to ensure normal operation. So even if there is a problem with a small accessory, it may cause the photo printer to stop working. So even if there is a problem with a small accessory, it may cause the photo printer to stop working. Therefore, some parts of the photo machine equipment need to be maintained and cleaned regularly to keep it in the best working condition. The following is a brief introduction to the maintenance measures of the main parts.

Large format inkjet photo machine

1. Photojet nozzle

The print head is an indispensable core component in the wide format digital printer, which is directly related to the print quality and effect. Therefore, its maintenance knowledge is often mentioned, and everyone must have a certain understanding.

When the nozzle is slightly clogged, you can use the inkjet cleaning function of the digital printing machine to clean it; when the nozzle is seriously clogged, you need to remove the nozzle and put it in the cleaning solution to soak and clean. The specific soaking time depends on the degree of clogging of the nozzle set. In addition, the selection of ink should choose genuine high-quality ink to reduce the corrosion and clogging of the nozzle.

2. Photo guide rail

The maintenance of the guide rail of the photo printer is a gradual process. After the power of the photo machine is turned on first, let the trolley hit back and forth several times, and the dirt inside the guide rail slider will remain on the guide rail. Repeat several times, then wipe off the dirt with a paper towel or rag.

Secondly, after each photo printer print job is completed, the guide rail should be cleaned and maintained. Wipe the dirt on the guide rail with a clean cloth or non-depilatory paper towel dipped in alcohol, and then wipe the guide rail with a clean cloth or paper towel dipped in a little sewing machine oil.

3. Photographic grating

The grating is a piece of transparent film behind the small frame, which mainly plays the role of positioning. If the grating is dirty, there will be problems such as ghosting and misalignment. It is recommended to clean the grating regularly. When cleaning, gently wipe with water, do not use brute force, both sides must be scrubbed. If the grating is seriously damaged, it can be replaced directly.

4. Photo machine ink stack

After the inkjet printing machine has been working for a period of time, the blade and ink pad will be slowly stained with ink and dust. If it is not cleaned in time, it may cause ink dripping or clogging of the nozzle; therefore, it is necessary to dip the cleaning liquid with a cotton swab regularly to clean the ink stains and impurities on the blade and the ink stack. If the blade has been deformed or damaged, a new blade needs to be replaced.

Digital inkjet printer

The above are the accessories that the photo printer mainly needs to be cleaned regularly. In addition, other parts of the photo printer such as the drying system and the interior of the motor also need to be cleaned in time. Keeping the photo printer tidy not only enables the photo printer to operate normally, but also helps to extend the life of the photo printer.