Home> News> Piezoelectric photo machine-method of correctly maintaining it for long-term idle

Piezoelectric photo machine-method of correctly maintaining it for long-term idle

Piezoelectric photo machine may be left unused for a long time. During this period, how to maintain and maintain the nozzle of the equipment? The nozzle in the photo machine is a very precise and important part, just as important as the human heart. If it is broken, it can almost be said that the whole photo machine will not work. Therefore, the maintenance of the nozzle is very important.

Piezoelectric photo machine

1. Maintenance of Ink Road 

 For the inkjet printing machine using weak solvent ink, because the weak solvent ink has a certain volatility, the machine will not be blocked easily for a long time.

(1). Before shutting down, please put special cleaning liquid in the ink stack, do a cleaning, and then print a test strip to check whether the line is broken, to ensure that the nozzle is in a normal state. Then place the trolley in the ink stack to ensure that the nozzle and the ink stack are completely tight and shut down normally.

(2). If someone is on duty during the holiday, it is recommended to print the nozzle test strip every 3 days to check whether the nozzle is clogged. If there is any clogging, please clean it in time.

(3). If the shutdown is more than 3 days, please wipe the nozzle clean with a special cotton swab and special cleaning liquid. At the same time, please clamp the ink tube under the ink stack with a clip, and put some special  cleaning liquid in the ink stack to ensure that the surface of the nozzle is not wet.

For inkjet equipment using water-based ink, please follow the steps below to maintain the ink path:

(1). Before the machine is shut down and shut down, print a test strip to check whether the wire is disconnected to ensure that the nozzle is in a normal state, and then place the cart in the ink stack to ensure that the nozzle and the 
ink stack are completely tight.
(2). If someone is on duty during the holiday, it is recommended to print the nozzle test strip every 3 days to check whether the nozzle is clogged. If there is any clogging, please clean it in time.
(3). If the machine is shut down for more than 10 days, please wipe the nozzle with a special cotton swab and purified water, and clamp the ink tube under the ink stack with a clip. Put some pure water in the ink stack to ensure that the surface of the nozzle is not wet.

Inkjet printer

2.Environmental storage

(1). The ambient temperature of the storage device cannot be lower than 5 degrees Celsius. If conditions permit, keep the temperature above 14 degrees Celsius and the humidity between 35-65%.

(2). During the idle period of the digital inkjet printer, please cover the device with a dustproof cloth to prevent dust from polluting the device.

(3). Please put the device in a safe place to avoid damage to the device due to other abnormal reasons such as rodent infestation and insect infestation.

(4). Pay attention to the fire prevention, waterproofing and anti-theft of the storage room to avoid unnecessary losses.