Home> News> When sublimation transfer printing how to optimize the effect of it?

When sublimation transfer printing how to optimize the effect of it?

In sublimation transfer printing processing, clothing fabric printing, fabric transfer is divided into piece transfer and garment transfer. In this transfer process, the method of transfer of the piece and the transfer of the garment are roughly the same.

Sublimation transfer printing

How to make the inkjet thermal transfer paper achieve the best in the transfer process during the transfer process?

1. Please make a transfer sample before batch transfer to determine the temperature and time of the heat transfer machine that affects the color.

2. Before transfer, to ensure that the inkjet sublimation transfer paper is basically dry, so as to avoid the phenomenon of incomplete transfer, stains, etc.

3. Before the transfer, the inkjet sublimation transfer paper pattern and fabric should be blown to remove the paper scraps, cilia and other attachments on the fabric and inkjet thermal transfer paper, so as to prevent these debris from being caught in the inkjet heat. Printing defects occur between the transfer paper and the fabric.

4. The occurrence of ghosting is often due to the speed of the platen separation is too fast, the upper platen airflow adsorption inkjet sublimation transfer paper, then adjust the small throttle valve to make the plate heat transfer machine cylinder (or cylinder) separation speed slower The transfer of the inkjet thermal transfer paper is prevented from falling after being sucked up to cause secondary sublimation transfer and ghosting occurs. Avoid ghosting. You can also apply water-repellent cloth transfer or use inkjet transfer paper on the four corners of the inkjet transfer paper.

Sublimation printing

5. Because the cushioning material of the bottom plate (cotton cloth, sponge, cardboard, etc.) will cause excessive water vapor during the transfer after absorbing the moisture of the sublimation printer ink, the color of the pattern on the transfer cloth will be light, and the water mist will appear locally. Therefore, before the transfer and during the transfer process, it is necessary to heat the air several times to evaporate the moisture on the padded cotton cloth. If necessary, the dry pad material can be replaced in time to avoid this.

6. The plate transfer process should pay attention to the safety of operation, it is strictly prohibited to reach into the hot plate under the pressure plate, pay attention to avoid high temperature burns.