Home> News> Direct sublimation textile printer-the reason why its board is easy to burn

Direct sublimation textile printer-the reason why its board is easy to burn

There are several reasons for the direct sublimation textile printer to burn the  motherboard. The main reason is that the circuit line connecting the nozzles is not connected and the motherboard is burned out; or the voltage is too high, the stable voltage is not maintained at 220 voltage, resulting in burning out. The power supply of the printing machine cannot adjust the voltage, causing the machine to short-circuit and the main board burning; the electrolyte inside the machine cannot decompose some inferior ink, which the nozzle will burn out and causing the motherboard to burn out.

Direct Sublimation Textile Printer

Is there any good solution for how to avoid the sublimation printing machine burning motherboard?

1.When buying a large format sublimation printer, be sure to choose a machine that is stable and cost-effective.

2.To provide a stable voltage environment for the sublimation transfer printer, it is best to have a voltage regulator to prevent the voltage from burning out the motherboard.

3.Pick high quality ink.

So how do you choose good inks for your own use?

(1). The acidity and alkalinity of the sublimation ink of dye sublimation printer. For example, when the metal parts of the printer are in contact with the ink, some of them will be corroded. Here, we recommend using a neutral pH ink.

(2) .The fluidity of the ink is good or bad.Buy some trial ink in the air, and observe its liquidity for a month to see if it has serious particle problems.

(3). The surface tension of ink is also a factor.The better the fluidity of the ink, the smaller the tension of the ink, and the finer the printed lines.

Sublimation Printer

(4). Pay attention to save ink.Strictly control the indoor temperature and humidity, and the indoor temperature should be at least 18 °C. After the temperature of the southern users increases, the humidity in the room should be controlled.Excessive humidity will cause the the picture is not be easy to dry, and the material will be easily damp, which will affect the printing effect and post-processing of the picture.